TX1透亮型抛光粉 Bright type polishing powder

品牌:净魅

 透亮型抛光粉呈松懈黄色粉末，高外表活性，环保宁静。实用于大理石，石灰石等含钙量多的石材，创新结晶后的板材外表光感通透油润，光彩丰满有厚度，光芒度高，板面硬度进步，耐磨损，耐粉化不易退光，含热塑性成膜树脂对微小毛孔和松散外表有添补功效。

实用范畴：自然大理石(米黄系列、莎安娜、黄洞石、啡网等)

利用办法：

1.将不屈整的空中研磨至1500#以上, 把TX01透亮型抛光粉倒于地上，加上比例净水。用晶面处置机配百洁垫将抛光粉磨成浆状，来来回回约12-16频次。待石材外表出光后刮去外表多余粉浆，依据情况特质可用净水冲洗洁净石材外表然后吸干。

2.如需更高光芒可加大批多功效结晶膏共同百洁垫重新抛磨，举行最初的修饰处置。可加大晶面硬度和光芒度。颠末晶面处置的大理石外表平滑如新，光芒度可以到达90度以上。

包装规格：5KG/桶；20KG/桶

Translucent type polishing powder is a loose yellow powder, high surface activity, environmental safety. Suitable for marble, limestone and other more calcium stone renovation crystallization plate surface after the light-sensitive transparent oily, full color, thickness, gloss, plate surface hardness, wear resistance, easy chalking back light, comprising a thermoplastic film-forming resin on the surface of fine pores and loose-fill feature.

Scope: Natural marble (beige series, ROYAL, yellow travertine, Emperador, etc.)

Instructions:

1. The uneven floors above ground to # 1500, the TX01 translucent type polishing powder fell on the ground, with the proportion of water. Crystal plane processor equipped with scouring pad grinding to polishing slurry back and forth for about 12-16 frequency. Until the stone surface of the rear surface of the light scrape excess slip, according to the environmental characteristics of the stone surface clean and rinse with water and then dry.

2. For a higher gloss can add a small amount of cream with crystallized multifunction scouring pad re-polishing, the final touches processing. Can increase the crystal surface hardness and gloss. Marble crystal surface treatment after the surface smooth as new, gloss up to 90 degrees.

Precautions:

1. Suitable placed in a cool ventilated place, avoid sun exposure.

2. Avoid contact with skin and eyes, away from children's reach.